Antique 2x12 Glass Subway Tiles
A very light warm off white or it could be described as a warm grey or light taupe. Similar to our country cottage color, but with a slightly yellow undertone. Also available in 3x6, arabesque, and pencil trim!
1 Sq Ft: $16.99
2" x 12" Sample: $6.99
Dimensions: 2" x 12" x 5/16"
Weight: 3.8 LBS/ Sq Ft
Finish: High Gloss
Sq Ft/Piece: .167
Quick tips for Glass Subway Tile Installation
Please note, these are general guide lines and tips for installing glass subway tiles. They are not meant to replace the expertise of a tile setter. Hiring a professional tile contractor is recommended for proper tile installation.
Recommended Application: Residential, Light Commercial, Medium Commercial, Bath/Shower, Fireplace, Indoor, Wall
Grout: A non-sanded grout is recommended to avoid scratching/damaging your glass tile. Grout sealer should be applied after the grout has fully cured to keep grout lines looking clean and fresh over time.
Trowel: Please use a 3/16” or 1/8” v notch trowel.
Spacers:1/16” or 1/8” spacers should be used. Spacers larger than 1/8” are not recommended for use with non-sanded grouts.
Adhesive: Please use a white adhesive that is recommended for glass tiles and mosaics. The bag or bucket of adhesive will state weather it can be used with glass tiles.
Cutting Glass Tile: To cut your tile, please use a tile wet saw with a glass cutting diamond blade. Please note, any other type of tile blade may cause chipping along the edge. You may also use a carbide cutter to make straight cuts. However, L shaped cuts can only be made with a wet saw.
Wet Areas: You may require use of a waterproof membrane when your tile is being installed in wet areas such as a tub surround or shower. We recommend using RedGard. .